Load envelopes – HP Deskjet F375 All-in-One Printer User Manual

Page 18

Advertising
background image

To load 10 x 15 cm ( 4 x 6 inch) photo paper with tab in the input tray
1.

Remove all paper from the input tray.

2.

Insert the stack of photo paper into the far-right side of the input tray with the
short edge forward and the print side down. Slide the stack of photo paper
forward until it stops.
Load the photo paper so that the tabs are closest to you.

Tip

For more help on loading small-size photo paper, refer to the guides

engraved in the base of the input tray for loading photo paper.

3.

Slide the paper-width guide inward until it stops at the edge of the paper.
Do not overload the input tray; make sure the stack of paper fits within the input
tray and is no higher than the top of the paper-width guide.

For best results, set the paper type and paper size before copying or printing.

Load envelopes

You can load one or more envelopes into the input tray of the HP All-in-One. Do not
use shiny or embossed envelopes or envelopes that have clasps or windows.

Note

For specific details on how to format text for printing on envelopes,

consult the help files in your word processing software. For best results,
consider using a label for the return address on envelopes.

To load envelopes
1.

Remove all paper from the input tray.

2.

Insert one or more envelopes into the far-right side of the input tray with the
envelope flaps up and on the left. Slide the stack of envelopes forward until it
stops.

Tip

For more help on loading envelopes, refer to the diagram engraved

in the base of the input tray.

3.

Slide the paper-width guide inward against the stack of envelopes until it stops.
Do not overload the input tray; make sure the stack of envelopes fits within the
input tray and is not higher than the top of the paper-width guide.

User Guide

15

Load

originals

and

load

paper

Advertising