HP Deskjet F375 All-in-One Printer - Manual (Page 35)

To clean the print cartridges from the HP Photosmart Mac Software
1.
Load letter, A4, or legal unused plain white paper into the input tray.
2. In the HP Photosmart Studio task bar, click Devices .
The HP Device Manager window appears.
3. Make sure the HP All-in-One is selected in the Devices pop-up menu.
4. From the Information and Settings pop-up menu, choose Maintain Printer .
The Select Printer window appears.
5. If the Select Printer dialog box appears, choose the HP All-in-One, and then
click Launch Utility .
The HP Printer Utility window appears.
6. Click Clean in the Configuration Settings Panel .
7. Click Clean .
8. Follow the prompts until you are satisfied with the quality of the output, and then
close the
HP Printer Utility .
If copy or print quality still seems poor after you clean the print cartridges, try
cleaning the print cartridge contacts before replacing the affected print cartridge.
Clean the print cartridge contacts
Clean the print cartridge contacts if you get repeated messages on your computer
screen prompting you to check a print cartridge after you already have cleaned or
aligned the print cartridges, or if the Check Print Cartridge light is blinking.
Before cleaning the print cartridge contacts, remove the print cartridge and verify that
nothing is covering the print cartridge contacts, then reinstall the print cartridge. If you
continue to get messages to check the print cartridges, clean the print cartridge
contacts.
Make sure you have the following materials available:
●
Dry foam rubber swabs, lint-free cloth, or any soft material that will not come
apart or leave fibers.
Tip Coffee filters are lint-free and work well for cleaning print cartridges.
● Distilled, filtered, or bottled water (tap water might contain contaminants that can
damage the print cartridges).
Caution Do not use platen cleaners or alcohol to clean the print
cartridge contacts. These can damage the print cartridge or the HP All-in-
One.
To clean the print cartridge contacts
1.
Turn on the HP All-in-One and open the print cartridge door.
The print carriage moves to the center of the HP All-in-One.
2. Wait until the print carriage is idle and silent, and then unplug the power cord
from the back of the HP All-in-One.
3. Lightly press down on the print cartridge to release it, and then pull it toward you
out of the slot.
Chapter 8
32 HP Deskjet F300 All-in-One series
Maintain the
HP All-in-One