HP 1.10GB Virtual Connect Ethernet Module for c-Class BladeSystem - Manual (Page 44)

Domain management 44
Trap categories and required administrative privileges
In general, users with Domain privileges can manage any SNMP operations. Users with Network
privileges can manage Ethernet operations, and users with Storage privileges can manage FC operations.
The following table provides a summary of trap categories and the required administrative privileges.
Trap Category Domain Network Storage
VC-Enet Port Status X X —
VC-Enet Port Threshold X X —
VC-Enet Other X X —
VC-FC Port Status X — X
VC-FC Other X — X
VCM Legacy X — —
VCM Security X — —
VCM Domain Status X — —
VCM Network Status X — —
VCM Fabric Status X — —
VCM Profile Status X — —
VCM Server Status X — —
VCM VC-Enet Status X — —
VCM VC-FC Status X — —
To enable or disable SNMP on a VC-Enet module, Domain or Network privileges are required. To enable
or disable SNMP/SMI-S on a VC-FC module, Domain or Storage privileges are required.
Trap severities
Users can configure the severity of traps to be sent to each trap destination. The levels are listed below in
decreasing order of severity:
• CRITICAL—The component cannot manage installed VC components.
• MAJOR—One or more of the component's subsystems are not operating properly, causing serious
disruption to functions.
• MINOR—One or more of a component's subsystems are not operating properly, causing slight
disruption to functions.
• WARNING—The component has a potential problem.
• INFO—Operational information on the fully functioning component.
• UNKNOWN—VC Manager has not yet established communication with the component.
• NORMAL—The component is fully functional.
Trap severities are only supported for VC-Enet or VCM traps.