HP Virtual Connect 1.10Gb-F Ethernet Module for c-Class BladeSystem - Manual (Page 20)

Command line 20
Item Description
->add enet-connection MyNewProfile
Network=SomeNetwork2 PXE=enabled
Adds a new Ethernet network connection and enables PXE
->add enet-connection MyNewProfile
Adds a new Ethernet network connection and leaves the network
unassigned
->add enet-connection MyNewProfile
AddressType=Factory-Default
Adds a new Ethernet network connection and uses factory default
addresses
->add enet-connection MyNewProfile AddressType=User-
Defined EthernetMAC=00-17-A4-77-00-00 iScsiMAC=00-
17-A4-77-00-01
Adds a new Ethernet network connection and provides user-defined
MAC addresses
->add enet-connection MyProfile Network=MyNetwork
SpeedType=Preferred
Adds a new Ethernet network connection and sets the speed to
"Preferred"
->add enet-connection MyProfile Network=MyNetwork
SpeedType=Custom Speed=2000
Adds a new Ethernet network connection and sets the speed to 2Gb
Item Description
remove enet-connection Remove the last Ethernet network connection from an existing server
profile.
Syntax remove enet-connection <ProfileName>
Parameter
ProfileName (required) The name of the profile from which to remove the Ethernet connection.
Example
->remove enet-connection MyProfile
Removes an Ethernet network connection from a profile.
Item Description
set enet-connection Modify an Ethernet connection of a server profile.
Syntax set enet-connection <ProfileName> <Port>
[Network=<NetworkName>]
[PXE=<enabled|disabled|UseBios>]
[SpeedType=<Auto|Preferred|Custom>] [Speed=<speed>]
Parameters
ProfileName (required) The name of the server profile that contains the connection to modify
Port (required) The port number of the connection being modified
Properties
NetworkName The name of the Ethernet network to associate with the connection.
Applies to Ethernet network connections only. A blank string makes the
Ethernet connection unassigned.