HP Virtual Connect 1.10Gb-F Ethernet Module for c-Class BladeSystem - Manual (Page 26)

Command line 26
Item Description
Syntax remove fabric <Name | *>
Parameter
Name (required) The name of an existing fabric or "*" to be removed
Examples
->remove fabric VFabric_1
Removes VC FC SAN fabric VFabric_1
->remove fabric *
Removes all VC FC fabrics from the domain
Item Description
set fabric Modify an existing FC SAN fabric.
Syntax set fabric <Name> [-loadBalance] [Name=<NewName>]
[Speed=<Auto|1Gb|2Gb|4Gb>] [Login=<Static|Dynamic>]
[Ports=<PortList>]
Parameter
FabricName
(required)
The name of an existing FC SAN fabric to modify (required)
Option
loadBalance Perform load balancing on a fabric configured for dynamic login distribution.
Properties
Name (optional) The new name of the fabric
Speed (optional) The port speed for the uplink ports in the fabric Valid values include: “Auto”, “1Gb”,
“2Gb”, and “4Gb”. The default port speed is “Auto”.
Login (optional) Specifies the login distribution scheme to use for load balancing. Valid values
include: "Static" and "Dynamic". The default login distribution is "Dynamic".
Ports (optional) A list of one or more logical FC ports associated with the fabric. Each port is
specified in the format "<port1>,<port2>,...", where port is the interconnect module
port to be modified in the fabric (affects all modules within a bay group). A blank
string removes all the ports that are assigned to the fabric.
Examples
->set fabric MyFabric1 Name=MyNewName1
Changes the name of an existing fabric
->set fabric MyFabric2 Speed=2Gb Login=Dynamic
Modifies the port speed and login distribution
->set fabric MyFabric3 Ports=1,2,3,4
Modifies the fabric ports contained in the fabric
->set fabric MyFabric4 ports=””
Removes the fabric ports assigned to the fabric
->set fabric MyFabric5 -loadBalance
Performs load balancing on a fabric with dynamic login distribution
Item Description
show fabric Display all FC SAN fabrics.