HP Virtual Connect 1.10Gb-F Ethernet Module for c-Class BladeSystem - Manual (Page 48)

Command line 48
Item Description
->poweroff server *
Powers off all servers in the domain
->poweroff server enc0:*
Powers off all servers in a specific enclosure
->poweroff server enc0:2 -ForceOnTimeout
Attempts a graceful poweroff, but forces a shutdown at the end of the timeout
period
->poweroff server * -timeout=180
Shuts down all servers and specifies a custom timeout of 3 minutes
Item Description
poweron server Power on one or more physical servers.
Syntax poweron server [<ServerID> | *] [-timeout=<timeout>]
Parameter
ServerID (required) The reference ID of a server in the domain. The format of the server ID is
<EnclosureID:DeviceBay>. If the EnclosureID is not provided, then the
primary or local enclosure is used by default. "*" powers on all servers in the
domain.
Option
Timeout The timeout period (in seconds) to wait for the operation to complete. The default
timeout is 60 seconds.
Examples
->poweron server 2
Powers on the specific server in bay 2 of the primary enclosure
->poweron server *
Powers on all servers in the domain
->poweron server enc0:*
Powers on all servers in a specific enclosure
Item Description
reboot server Reboot one or more physical servers.
Syntax reboot server [<ServerID>|*] [-Force]
[-ForceOnTimeout] [-timeout=<timeout>
Parameter
ServerID (required) The reference ID of a server in the domain. The format of the server ID is
<EnclosureID:DeviceBay>. If the Enclosure ID is not provided, then the
primary or local enclosure (enc0) is used by default. "*" reboots all servers in the
domain.
Options
Force Forces a reboot operation without waiting for the OS to shutdown gracefully. This
option should be used only as a last resort because it can cause potential data
loss on the server.
ForceOnTimeout Attempts a graceful power down, but if the server does not shutdown within the
timeout period (default is 60 seconds), then the server is forced to power off.