HP Virtual Connect 1.10Gb-F Ethernet Module for c-Class BladeSystem - Manual (Page 60)

Command line 60
Supported actions: help, show
Item Description
show systemlog Display the Virtual Connect manager system log.
Syntax show systemlog [-Last=<n>] [-First=<n>] [-Pause=<n>]
Options
Last Display the last n records. If this option is specified and no value is provided,
the default is the last 10 records
First Display the first n records. If this option is specified and no value is provided,
the default is the first 10 records.
Pause Number of records to be viewed before prompting for key press. Valid values
include numbers between 1 and 40.
Examples
->show systemlog
Displays the entire system log
->show systemlog -pause=8
Displays the system log, eight records at a time
->show systemlog -first=12
Displays the first twelve records from system log
->show systemlog -last=8
Displays the last eight records from system log
->show systemlog -last=20 -pause=6
Displays the last twenty records from system log, six records at a time
uplinkport
Manage interconnect module uplink ports.
Supported actions: add, help, remove, set, show
Item Description
add uplinkport Add a new uplink port to an existing network or a shared uplink port set.
Syntax add uplinkport <PortID> [Network=<NetworkName> |
UplinkSet=<UplinkSet>] [Speed=<Auto|10Mb|100Mb|1Gb|Disabled>]
[Role=<Primary|Secondary>]
Parameter
PortID (required) The ID of an uplink port to add (required). The ID is a combination of the enclosure
name, interconnect bay, and port number in a single descriptor. The format of the
port name is "<EnclosureID>:<InterconnectBay>:<PortNumber>".
Properties
Network
(optional)
The name of an existing network to which the port is added
UplinkSet
(optional)
The name of an existing shared uplink port set to which the port is added
Speed (optional) Specifies the port speed for the port (optional). Valid values include "Auto",
"10Mb", "100Mb", "1Gb", and "Disabled". If not specified, the default port speed
is "Auto".