HP Virtual Connect 1.10Gb-F Ethernet Module for c-Class BladeSystem - Manual (Page 18)

Command line 18
Item Description
->import enclosure UserName=Administrator
Password=fgg7h*1 DoubleDense=true
Imports the local enclosure with double-dense device bay display format
Item Description
remove enclosure Remove a remote enclosure that has been imported into the domain. The local
enclosure is not allowed to be removed from the domain using the remove
enclosure command.
Syntax remove enclosure <EnclosureID | *>
Parameter
EnclosureID
(Required)
The enclosure ID of the remote enclosure to be removed from the domain,
where "*" removes all the remote enclosures that exist in the domain. The
enclosure IDs can be identified for a particular enclosure by using the show
enclosure command. The local enclosure cannot be removed from the
domain with this command.
Examples
->remove enclosure encl
Removes a remote enclosure
->remove enclosure *
Removes all remote enclosures from the domain
Item Description
show enclosure Display all enclosures in the domain.
Syntax show enclosure [<EnclosureID>|*]
Parameter
EnclosureID
(optional)
The ID of an enclosure in the domain. If specified, then only details for the
specified enclosure are displayed.
Examples
->show enclosure
Displays a summary listing of all enclosures
->show enclosure *
Displays detailed information for all enclosures
->show enclosure enc0
Displays detailed information for a specific enclosure
->show enclosure encl
Displays detailed information for a single enclosure
enet-connection
Manage Ethernet network connections.
Supported actions: add, help, remove, set, show