HP Virtual Connect 1.10Gb-F Ethernet Module for c-Class BladeSystem - Manual (Page 31)

Command line 31
Item Description
Example
->show igmp
Displays IGMP Snooping settings
interconnect
Manage I/O interconnect modules.
Supported actions: help, remove, show
Item Description
remove interconnect Remove a module from the domain that has been removed physically from an
enclosure. Normally this command is used if a module has been physically
removed from the enclosure. To be removed, the module must not be currently
in use by any element in the domain.
Syntax remove interconnect <ModuleID|*>
Parameter
ModuleID(required) The ID of the module to remove. The ID is in the format
<EnclosureID>:<BayNumber>. To display a list of the IDs corresponding
to modules in the domain, the show interconnect command can be used.
Examples
->remove interconnect enc0:2
Removes a specific interconnect module (bay 2) from the domain
->remove interconnect *
Removes all interconnect modules from the domain that are not present
physically in any enclosures
->remove interconnect enc0:*
Removes all interconnect modules that are not present physically in a specific
enclosure
Item Description
show interconnect Display all interconnect modules known to the domain.
Syntax show interconnect [ModuleID|*]
Property
ModuleID ID of the interconnect module. “*” displays detailed view of all the modules in
the VC domain. If not specified, summary output of all the modules is displayed
Examples
->show interconnect
Displays a summary listing of all interconnect modules
->show interconnect *
Displays detailed information for all interconnect modules
->show interconnect *:5
Displays the detailed information for all enclosures with interconnect modules
in interconnect bay number 5