HP Virtual Connect 1.10Gb-F Ethernet Module for c-Class BladeSystem - Manual (Page 62)

Command line 62
Item Description
Network
(optional)
The name of the network to which the port belongs
UplinkSet
(optional)
The name of the shared uplink port set to which the port belongs
Speed (optional) Specifies the port speed for the port. Acceptable values include "Auto", "10Mb",
"100Mb", "1Gb", and "Disabled".
Role (optional) The Role played by the port if the connection mode of the network or shared
uplinkset is selected as "Failover". The default value is "Primary".
Examples
->set uplinkport enc0:1:2 Network=MyNetwork Speed=1Gb
Changes the port speed of a network port
->set uplinkport enc0:2:1 Network=MyNetwork Speed=Disabled
Disables a specific port that belongs to a network
->set uplinkport enc0:2:4 UplinkSet=MyUplinkSet
Speed=Disabled
Disables a specific port that belongs to a shared uplink set
->set uplinkport enc0:2:4 Network=MyNetwork Role=Primary
Modifies an uplink port of a network with the connection mode as Failover to take
the primary port role
Item Description
show uplinkport Display all Ethernet module uplink ports known to the domain. If the port is a
member of a network or a shared uplink port set, then it is displayed also.
Syntax show uplinkport <PortID | *>
Parameter The ID of an uplink port. The PortID format is <EnclosureID>:<Bay>:<PortNumber>.
"*" displays a detailed view of all uplink ports.
PortID (optional)
Example
->show uplinkport
Displays all uplink ports
->show uplinkport enc0:5:6
Display details of uplink port 6 in bay 5 of the local enclosure
->show uplinkport *
Displays all uplink ports in the enclosure (detailed view)
uplinkset
Manage shared uplink port sets
Supported actions: add, help, remove, set, show
Item Description
add uplinkset Create a new shared uplink port set.
Syntax add uplinkset <UplinkSetName>
[ConnectionMode=<Auto|Failover>]