HP StorageWorks XP Remote Web Console Software - Manual (Page 121)

Figure 49 Paircreate Dialog Box for Asynchronous Pairs
•
P-VOL: Displays the port number, GID, LUN, CLPR number, and CLPR name of the selected
LU(s). If you selected more than one P-VOL, the P-VOL with the lowest LUN is displayed.
If the pound or gate symbol (#) is added to the end of the device ID (00:00:3C #, for example),
the LDEV is an external volume. For details on external volumes, see the HP XP24000/XP20000
External Storage Software User's Guide.
If an X mark is added to the end of the device ID (00:00:3C X, for example), the LDEV that
the number indicates is a Thin Provisioning virtual volume. For details on virtual volumes, see
the HP XP24000/XP20000 Thin Provisioning Software User's Guide.
•
S-VOL: Allows you to select the S-VOL(s) for the new pair(s). If you selected more than one
P-VOL, select the S-VOL for the P-VOL being displayed. The S-VOLs for the rest of the P-VOLs
are automatically assigned according to the LUN. For example, if you select three P-VOLs and
select LUN001 as the S-VOL for the first P-VOL, the S-VOLs for the two other P-VOLs will be
LUN002 and LUN003.
You can select the port number from the drop-down list, or enter it directly. When you enter
the port number directly, you can specify it with two characters, for example, 1A for CL1-A.
You can also enter the port number in both lowercase and uppercase characters.
When creating more than one pair at a time, make sure that the S-VOLs to be assigned
automatically are available. If an S-VOL is not available, you will have to select the S-VOL
individually.
•
RCU: Select the RCU for the XP Continuous Access pair(s) being created. The RCUs that have
been added to the current MCU are displayed. In the drop-down list, the serial number, LDKC
number, Controller ID, model name, Path Group ID, and path type are displayed for CU Free.
On the other hand, the serial number, LDKC number, CU number, SSID, and path type are
displayed for a CU other than CU Free. The RCU must be the same for all pairs being created
during one operation.
Creating XP Continuous Access Pairs 121