HP StorageWorks XP Remote Web Console Software - Manual (Page 74)

Figure 28 Asynchronous Operation Window
The Asynchronous Operation window displays:
Description Item
Allows you to display all consistency groups (except groups
that are used for XP Continuous Access) belonging to Tree
LDKC#00 (default) or all consistency groups (except groups
that are used for XP Continuous Access) belonging to
LDKC#01. For each LDKC, this tree displays the consistency
groups that are already in use (Used) and the consistency
groups that are available for use (Not Used).
LDKC#01 is not available for the current microcode version.
Displays the following consistency group information: List
• CTG: Consistency group number.
•
This CU: The CU to which the group is registered. MCU:
The group was added from the connected CU. RCU:
The group was added from the paired CU (connected
CU is an RCU). M&R: The MCU and RCU are in the
same storage system.
•
M-R Path: Channel type: fibre. If the consistency group
is not in use, this column is blank.
•
Offloading Timer: The time between XP Continuous
Access Asynchronous recordset transfers. If the
consistency group is not in use, this column is blank. If
this CU is an RCU, this parameter is invalid and a
hyphen is displayed in this column.
•
Inflow Control: Indicates whether the inflow control is
enabled or not. If the consistency group is not in use,
this column is blank. If this CU is an RCU, this parameter
is invalid and a hyphen is displayed in this column.
• Paired S/N: Serial number of the paired storage system
(if there is more than one RCU, the storage system with
74 Using the XP Continuous Access GUI