HP StorageWorks XP Remote Web Console Software User Manual
Page 162
Table 38 Error Code and Error Contents When Operating RAID Manager (continued)
Error Content
Error Code
(SSB2)
Error Code
(SSB1)
The S-VOL is the P-VOL for XP Continuous Access Asychronous.
C335
The S-VOL includes PIN data.
C336
The S-VOL is in the reserve status.
C337
Copy pair cannot be created because of one of the following reasons:
C338
•
The S-VOL is in the intervention-required condition, protected, or unusable status.
•
The S-VOL is the S-VOL or Reserved volume of XP Business Copy, Reserved volume
of XP Auto LUN, or the volume of XP Continuous Access Journal pair.
A request for Paircreate was received. However, the command was rejected because
the specified RCU is a product not supported by XP Continuous Access.
C33A
The corresponding volume cannot be specified as S-VOL because the volume is used
as another pair’s S-VOL.
C33B
A request for Paircreate was received. However, the command was rejected because
the specified S-VOL was not mounted.
C33C
Pair cannot be created because the S-VOL is not implemented or is blocked (DEV
NOT READY status).
C33E
The corresponding volume cannot be specified as S-VOL because the volume is
already specified as XP Continuous Access pair volume.
C33F
The P-VOL is not accessible.
C35C
The number of paths is smaller than the number of minimum paths that are required
to be specified because of the path failure or specifying the invalid path.
C370
The process which is performed after the copying process of XP Auto LUN in the
S-VOL is in progress. Retry the operation after a few minutes.
C371
The process which is performed after the copying process of Volume Migration in
the P-VOL is in progress. Retry the operation after a few minutes.
C372
A request for Paircreate was received. However, the command was rejected because
the specified S-VOL is a Reserved volume for XP Business Copy.
C373
A request for Paircreate was received. However, the command was rejected because
the specified P-VOL is a Reserved volume for XP Business Copy.
C374
The number of paths is smaller than the number of minimum paths that are required
to be specified because of the path failure or specifying the invalid path.
C379
The S-VOL cache is unavailable.
C37E
The S-VOL DFW is disable.
C37F
The cache of the MCU is in transition to blockage on one side.
C380
The cache of the MCU is in process of restore.
C381
The cache of the MCU is either in transition to blockage on one side or in process
of restore on one side.
C382
The RCU is already used by XP Continuous Access.
C38B
The S-VOL is the device not supported by XP Continuous Access.
C38E
The S-VOL status is not PSUS or PSUE.
C390
The S-VOL is in the non-copiable status.
C391
The S-VOL includes PIN data.
C393
162
Troubleshooting