HP Identity Driven Manager Software Licenses - Manual (Page 104)

3-40
Using Identity Driven Manager
Configuring Access Profiles
3. Modify the access profile parameters, as described for creating a new profile.
Click Edit to change the Network Resource Assignments using the wizard.
4. Click OK to save your changes and close the window.
The changes are displayed in the Access Profiles list.
N o t e : When modifying Access Profiles, make sure the appropriate VLANs are configured
on the network and at the switch. If you Modify the VLAN attribute in an Access
Profile that is currently used in an Access Policy Group rule, IDM will check that
the VLAN exists. If not, an error message is displayed.
Deleting an Access Profile
To remove an existing Access Profile:
1. On the Access Profiles window, select an Access Profile from the list.
2. Click the Delete Access Profile button in the toolbar to remove it.
3. The first time you use the Delete option, a warning pop-up is displayed. Click
OK to continue, or Cancel to stop the delete process.
N o t e Before you modify or delete an Access Profile, make sure that your changes will not
adversely affect users in Access Policy Groups where the profile is used.