HP Identity Driven Manager Software Licenses - Manual (Page 199)

4-21
Using the Secure Access Wizard
Using Secure Access Wizard
Enter the RADIUS shared secret to be used for access authentication.
Re-enter the shared secret in the Confirm shared secret field.
If not using the same shared secret on all the devices, enter the Radius shared
secret for each device in the list. Use the scroll bar as needed to move down the
list. You will not be able to continue until the RADIUS shared secret is set for
each device in the list.
28. When you have entered the RADIUS shared secret, click Next to select the
devices that will be added to each of the previously selected RADIUS servers
as RADIUS clients.
29. To add all devices as clients to the displayed RADIUS server, click Select All.
30. To unselect all devices, click Unselect All.
31. To add specific devices as clients to the RADIUS server listed in the Target
RADIUS Server column, select the check box next to the device.
32. To display additional error information about a device with an error button,
mouse over the error button.
33. Click Next to validate your entries and continue to the Save Settings (selection)
window.
Figure 4-16. Secure Access Wizard, Save Settings selection