HP Identity Driven Manager Software Licenses - Manual (Page 124)

3-60
Using Identity Driven Manager
Configuring Auto-Allow OUIs
c. Optionally, in the Description field, type a brief description identifying the
type of device using the MAC prefix.
d. From the Access Policy Group, list select the Access Policy Group to which
the OUI will be assigned.
e. Click OK.
N o t e s : HP devices are allocated MAC prefixes (OUIs) in disparate blocks. Therefore, IDM
is not able to show OUIs for HP devices in the list of well-known MAC prefixes on
the Add OUI window.
For example, today HP books a block of 10,000 MAC prefixes. After all of these are
used up for particular HP product(s), then HP books another block of MAC prefixes.
This way, new models of the same HP product will have different range of MAC
prefixes.
When Creating an Access Policy Group
OUIs can also be added to IDM when creating an Access Policy Group, as explained
below.
1. When creating a new Access Policy Group, on the New Access Policy Group
window, select the Auto-Allow OUIs check box to activate the OUI buttons.
2. In the OUI section of the New Access Policy Group window, click New.
Figure 3-43. Add Auto-Allow OUI
3. On the Add OUI window, in the MAC Prefix field, use the list to select a pre-
loaded well known OUI.