HP Identity Driven Manager Software Licenses - Manual (Page 222)

A-6
IDM Technical Reference
Best Practices
The other important piece in this process is the order of the rules. In the second
example, if you change the order of the rules, users would be allowed access all the
time.
The two examples above are quite simple. However, in instances where you want to
be able to restrict user access to specific areas of the network at specific times, or
restrict network resources to users at specific times and locations, the decision to use
the “allow” vs. “reject” method and the ordering of the rules becomes more complex.
Rate-Limiting
The option for rate-limiting using the Bandwidth option in Access Profiles works
like this:
• When the Access Profile is applied, IDM sends a rate-limit in Kbps to the
switch.
• The switch takes the value passed from IDM and converts it to a rate
percentage, based on the port link speed.
If the value passed to the switch by IDM is greater than the port link speed, the switch
will ignore the parameter received from IDM. To avoid problems, avoid using low
rate-limit policies on the switch, or make sure that the IDM rate-limits do not exceed
the link speeds of ports in your network.