HP Identity Driven Manager Software Licenses - Manual (Page 75)

3-11
Using Identity Driven Manager
Configuring Times
Configuring Times
Times are used to define the hours and days when a user can connect to the network.
When included in the Access Policy Group rules, the time can be used to allow or
deny access from specific locations at specific time. For example, students might be
allowed network access from the "Classroom" location during weekdays, from 9:00
am to 5:00 pm, but denied access from the Classroom at any other time.
To configure a Time:
1. On the IDM main window, select Tools > Configure Times.
OR
Select the Times node from the Identity Management Configuration navigation
tree to display the Times pane.
Figure 3-7. Identity Management Configuration, Times pane
The Times pane lists the name and description of defined times. Double-click the
time from the list, or select the time from the navigation tree to display the Time’s
properties, including:
Table 3-1. Times pane parameters
Field/Section Displays...
Name The name used to identify the time
Description A brief description of the time
Time The time of day when the access policy group is active.