HP Integrity NonStop H-Series - Manual (Page 25)

Installing and Configuring the ACL Tape Drive for the
NonStop S-Series Server
N1528A and N1529A ACL Tape Drive Installation and User’s Guide— 544594-002
3 -3
Installation Procedure for New Model
You can use any of the following NonStop SCSI cables:
6. Connect the one end of the VHDCI SCSI cable to the bottom SCSI port on the
SCSI Converter card. See Figure 3-2 .
7. Connect the other end of the VHDCI SCSI cable to the bottom SCSI port on the
tape drive.
8. Install the terminator on the top SCSI port of the tape drive. See Figure 3-2 .
Table 3-1. NonStop SCSI Cables
Model Number Description
519-003W 3 meter copper SCSI cable
519-015W 15 meter copper SCSI cable
519-020W 20 meter copper SCSI cable
519-023W 23 meter copper SCSI cable
Figure 3-2. Rear View of Tape Drive
Terminator VHDCI SCSI Cable Connect NonStop SCSI Cable Here
Terminator Switch to On