HP Integrity NonStop H-Series - Manual (Page 80)

Specifications
N1528A and N1529A ACL Tape Drive Installation and User’s Guide— 544594-002
A- 2
Power Requirements
Power Requirements
The tape drives exhibits a nominal steady state AC power consumption of 192 watts,
and a maximum peak consumption of 240 watts.
Current
1.6 - 1.0 amperes (120 - 240 V ac)
Temperature, Humidity, and Altitude
Table A-2. Temperature, Humidity, and Altitude Specifications
Non-Operating - Long Term Unpacked or Packed
Dry Bulb Temperature -40°C to 60°C
Temperature Gradient 20°C/hour (across the range)
Temperature Shock 15°C (over 2 minutes)
Wet Bulb Temperature 30°C
Relative Humidity 5% to 95% (non-condensing)
Humidity Gradient 10%/hour.
Altitude (sea level) -1000 feet to +10,000 feet
Transit - Short Term Packed 7 days
Dry Bulb Temperature -40°C to 60°C
Temperature Gradient 25°C/hour (across the range)
Temperature Shock 15°C (over 2 minutes)
Wet Bulb Temperature 30°C
Relative Humidity 5% to 95% (non-condensing)
Altitude (sea level) -1000 feet to +10,000 feet