HP Integrity NonStop H-Series - Manual (Page 26)

Installing and Configuring the ACL Tape Drive for the
NonStop S-Series Server
N1528A and N1529A ACL Tape Drive Installation and User’s Guide— 544594-002
3 -4
Installation Procedure for New Model
9. Attach the male end of the power cord to an AC power outlet.
10. Toggle the terminator switch to the on position ( the terminator switch must be
set to the on position for the NonStop server ).
11. Toggle the power switch at the rear of the tape drive to the on position.
12. Press the GUI screen at the front of the tape drive to activate the library.
13. Verify that the drive powers on.
WARNING. The tape drive does not have protection against lightning surges. For this reason,
if you are located in a high risk area, use external surge protection rated for use in your
location and be able to handle the power requirements of the tape drive enclosure.