HP XP7 Storage User Manual
Page 112
Description
Operand
For example, you can specify RCLU CL1-C.01:CL2-A.01, but you cannot specify
RCLU CL2-A.01:CL1-C.01
. Also, you can specify RCLU CL1-C.01:CL1-C.03, but you
cannot specify RCLU CL1-C.03:CL1-C.01.
If port-name.host-group-id is not specified, the monitoring data of all volumes (LUs) will be
exported.
Use this operand when you want to export statistics about remote copy operations of Continuous
Access Synchronous and Continuous Access Synchronous Z. By using this operand, you can
RCLDEV[[LDKC-CU-id]:[LDKC-CU-id]][…]|
export monitoring data about remote copy operations performed by Continuous Access
Synchronous and Continuous Access Synchronous Z at volumes controlled by each CU. When
statistics are exported to a ZIP file, multiple ZIP files whose names are beginning with RCLDEV_
will be output. For details on the statistics exported by this operand, see
.
When you specify variables LDKC-CU-id, you can narrow the range of LDKC:CUs that control
the volumes whose monitoring data are to be exported. LDKC-CU-id is an ID of a LDKC:CU.
The colon (:) indicates a range. For example, 000:105 indicates LDKC:CUs from 00:00 to
01:05.
Ensure that the LDKC-CU-id value on the left of the colon is smaller than the LDKC-CU-id value
on the right of the colon. For example, you can specify RCLDEV 000:105, but you cannot
specify RCLDEV 105:000.
If LDKC-CU-id is not specified, the monitoring data of all volumes will be exported.
Use this operand when you want to export statistics about remote copy operations of Cnt Ac-J
and Cnt Ac-J Z. By using this operand, you can export monitoring data about remote copy
UniversalReplicator
operations performed by Continuous Access Journal and Continuous Access Journal Z in the
whole volume. When statistics are exported to a ZIP file, the file name will be
UniversalReplicator.zip
. For details on the statistics exported by this operand, see
Use this operand when you want to export statistics about remote copy operations of Cnt Ac-J
and Cnt Ac-J Z. By using this operand, you can export monitoring data about remote copy
URJNL[[JNL-group-id]:[JNL-group-id]][…]
operations performed by Continuous Access Journal and Continuous Access Journal Z at each
journal. When statistics are exported to a ZIP file, the file name will be URJNL_dat.ZIP. For
details on the statistics exported by this operand, see
When you specify variables JNL-group-id, you can narrow the range of journals whose monitoring
data are to be exported. JNL-group-id is a journal number. The colon (:) indicates a range. For
example, 00:05 indicates journals from 00 to 05.
Ensure that the JNL-group-id value on the left of the colon is smaller than the JNL-group-id value
on the right of the colon. For example, you can specify URJNL 00:05, but you cannot specify
URJNL 05:00
.
If JNL-group-id is not specified, the monitoring data of all journal volumes will be exported.
Use this operand when you want to export statistics about remote copy operations of Cnt Ac-J
and Cnt Ac-J Z. By using this operand, you can export monitoring data about remote copy
URLU[
[port-name.host-group-id]
:[
port-name.host-group-id]
][
…]
operations performed by Continuous Access Journal and Continuous Access Journal Z at each
volume (LU). When statistics are exported to a ZIP file, the file name will be URLU_dat.ZIP.
For details on the statistics exported by this operand, see
.
When you specify variables port-name.host-group-id, you can narrow the range of LU
paths whose monitoring data are to be exported, where port-name is a port name and
host-group-id
is the ID of a host group. The host group ID must be a hexadecimal numeral.
The colon (:) indicates a range. For example, CL1-C.01:CL1-C.03 indicates the range from
the host group #01 of the CL1-C port to the host group #03 of the CL1-C port.
Ensure that the value on the left of the colon is smaller than the value on the right of the colon.
The smallest port-name value is CL1-A and the largest port-name value is CL4-r. The following
formula illustrates which port-name value is smaller than which port-name value:
CL1-A < CL1-B < … < CL2-A < CL2-B < … < CL3-a < CL3-b < … < CL4-a < … < CL4-r
For example, you can specify URLU CL1-C.01:CL2-A.01, but you cannot specify
URLU CL2-A.01:CL1-C.01
. Also, you can specify URLU CL1-C.01:CL1-C.03, but you
cannot specify URLU CL1-C.03:CL1-C.01.
If port-name.host-group-id is not specified, the monitoring data of all volumes (LUs) will be
exported.
112
Exporting Performance Monitor data