Adding wwns to ports, Editing the wwn nickname, Adding wwns to ports editing the wwn nickname – HP XP7 Storage User Manual
Page 16
4.
On the Monitored WWNs tab click Edit WWN Monitor Mode to open the Edit WWN Monitor
Mode window.
5.
Select the WWNs in the Monitored WWNs list that you want to remove, and click Remove.
6.
Enter your task name in Task Name, and click Finish.
7.
In the Confirm window click Apply.
8.
When the warning message appears, click OK to close the message. The settings are applied
to the storage system.
Related topics
•
“Edit WWN Monitor Mode wizard” (page 169)
Adding WWNs to ports
If you want to monitor WWNs that are not connected to the storage system, you can add them to
ports and set them up for monitoring with Performance Monitor.
Prerequisites
•
Required role: Storage Administrator (Performance Management)
1.
Display the Remote Web Console main window.
2.
Select Analytics in Explorer, and then select Performance Monitor in the tree to open the
Performance Monitor window.
3.
In the Performance Monitor window click the Monitored WWNs tab.
4.
On the Monitored WWNs tab click Add New Monitored WWNs to open the Add New
Monitored WWNs window.
5.
Specify the following information for each new WWN:
Description
Item
Enter the 16-digit hexadecimal number.
HBA WWN (required)
Enter the unique name to distinguish the host bus adapter from others. The
WWN Name must be less than 64 characters and must consist of
alphanumeric characters and at least one symbol.
WWN Name (optional)
In the Available Ports list select the port connected to the WWN. Ports
connected to mainframe hosts are not displayed, because they are not
supported for Performance Monitor.
Port (in Available Ports)
6.
Click Add. The added WWN is displayed in Selected WWNs.
7.
If you need to remove a WWN from the Selected WWNs list, select the WWN and click
Remove.
8.
When you are done adding WWNs, click Finish.
9.
In the Confirm window click Apply to apply the settings to the storage system.
Related topics
•
“Add New Monitored WWNs wizard” (page 172)
Editing the WWN nickname
Prerequisites
•
Required role: Storage Administrator (Performance Management)
To edit the nickname of a WWN being monitored:
1.
Display the Remote Web Console main window.
16
Performance Monitor operations