HP XP7 Storage - Manual (Page 212)

Description Item
The current system control. Current Control
Status
•
Port Control: The system is controlled by the upper limits and threshold specified on the Port
tab.
•
WWN Control: The system is controlled by the upper limits and threshold specified on the
WWN tab.
•
No Control: The system performance is not controlled by Performance Control.
Tip: If Port Control appears when the WWN tab is active, click Apply to switch control so that
WWN Control is displayed.
Tip: To return the control status to No Control, specify Prio. for attributes of all host bus adapters
and then click Apply.
Allows you to narrow WWNs in the list: Control List
• If All is selected, all WWNs appear in the list.
•
If Prioritize is selected, only the prioritized WWNs appear in the list.
• If Non-Prioritize is selected, only the non-prioritized WWNs appear in the list.
Ports and the host bus adapters connected to these ports in the storage system. Ports on the
storage system are shown below the Storage System folder. The ports are indicated by icons
such as and .
Upper-left tree
When you double-click on a port, the tree expands to display two items: Monitor and
Non-Monitor. The host bus adapters that are connected to the specified port are displayed
below Monitor or Non-Monitor.
•
If you double-click Monitor, the host bus adapters ( ) whose traffic with the specified port
is monitored are displayed below Monitor.
•
If you double-click Non-Monitor, the host bus adapters whose traffic with the specified port
is not monitored are displayed below Non-Monitor.
212 Performance Control GUI reference