Short-range – HP XP7 Storage User Manual
Page 113
Description
Operand
Use this operand when you want to export statistics about remote copy operations which of Cnt
Ac-J and Cnt Ac-J Z. By using this operand, you can export monitoring data about remote copy
URLDEV
[[LDKC-CU-id]:[LDKC-CU-id]][…]
operations performed by Continuous Access Journal and Continuous Access Journal Z at volumes
controlled by each CU. When statistics are exported to a ZIP file, multiple ZIP files whose names
are beginning with URLDEV_ will be output. For details on the statistics exported by this operand,
see
When you specify variables LDKC-CU-id, you can narrow the range of LDKC:CUs that control
the volumes whose monitoring data are to be exported. LDKC-CU-id is an ID of a LDKC:CU.
The colon (:) indicates a range. For example, 000:105 indicates LDKC:CUs from 00:00 to
01:05.
Ensure that the LDKC-CU-id value on the left of the colon is smaller than the LDKC-CU-id value
on the right of the colon. For example, you can specify URLDEV 000:105, but you cannot
specify URLDEV 105:000.
If LDKC-CU-id is not specified, the monitoring data of all volumes will be exported.
Use this operand when you want to export statistics about MP usage rate of each resource
allocated to MP blades in short range. When statistics are exported to a ZIP file, the filename
PhyMPPK
is PHY_MPPK.ZIP. For details on the statistics exported by this operand, see
.
Examples
The following example exports statistics about host bus adapters:
group PortWWN
The following example exports statistics about three ports (CL1-A, CL1-B, and CL1-C):
group Port CL1-A:CL1-C
The following example exports statistics about six ports (CL1-A to CL1-C, and CL2-A to CL2-C)
group Port CL1-A:CL1-C CL2-A:CL2-C
The following example exports statistics about the parity group 1-3:
group PG 1-3:1-3
The following example exports statistics about the parity group 1-3 and other parity groups whose
ID is larger than 1-3 (for example, 1-4 and 1-5):
group PG 1-3:
The following example exports statistics about the external volume groups E1-1 to E1-5:
group PG E1-1:E1-5
The following example exports statistics about the parity group 1-3 and other parity groups whose
ID is smaller than 1-3 (for example, 1-1 and 1-2):
group LDEV:1-3
The following example exports statistics about LU paths for the host group (host storage domain)
ID 01 for the port CL1-A:
group LU CL1-A.01:CL1-A.01
Short-range
Description
Use this subcommand to specify a term of monitoring data to be exported into files. Use this
subcommand when you want to narrow the export-target term within the stored data.
The short-range subcommand is valid for monitoring data in short range. Short-range monitoring
data appears in the Monitor Performance window when Short-range is selected as the storing
period.
All the monitoring items are stored in short range. Therefore, you can use the short-range
subcommand whichever operand you specify to the group subcommand. If you run the Export
Export Tool command reference
113