Selecting cus to monitor, Confirming the status of cus to monitor – HP XP7 Storage User Manual
Page 19
7.
In the Confirm window enter your task name in Task Name, and click Apply.
NOTE:
To monitor a parity group, specify the CU numbers of all LDEVs belonging to the parity
group. Otherwise the parity group is not subjected to monitoring.
Related topics
•
“Edit CU Monitor Mode wizard” (page 161)
Selecting CUs to monitor
Prerequisites
•
Required role: Storage Administrator (Performance Management)
To select the CUs to monitor:
1.
Display the Remote Web Console main window.
2.
Select Analytics in Explorer, and select Performance Monitor in the tree to open the Performance
Monitor window.
3.
Open the Monitored CUs tab.
4.
On the Monitored CUs tab click Edit CU Monitor Mode to open the Edit CU Monitor Mode
window.
5.
Click Select by Parity Groups in the Unmonitored CUs field.
The Select by Parity Groups window opens. The available parity group IDs and number of
CUs are displayed.
6.
Select the parity group ID from the list and click Detail.
The Parity Group Properties window opens. The CUs and the number of LDEVs are displayed.
7.
Confirm the properties of the parity group and click Close.
The Select by Parity Groups window opens.
8.
Select the parity group to be the monitoring target in the Select by Parity Groups window and
click OK.
CUs in the parity group are selected in the Unmonitored CUs field. For information about
monitoring these CUs, see
“Adding and removing CUs to monitor” (page 18)
Related topics
•
“Select by Parity Groups window” (page 165)
•
“Parity Group Properties window” (page 166)
•
“Adding and removing CUs to monitor” (page 18)
Confirming the status of CUs to monitor
Prerequisites
•
Required role: Storage Administrator (Performance Management)
To view the monitoring status of CUs:
1.
Display the Remote Web Console main window.
2.
Select Analytics in Explorer, and select Performance Monitor in the tree to open the Performance
Monitor window.
3.
Open the Monitored CUs tab.
4.
On the Monitored CUs tab click Edit CU Monitor Mode to open the Edit CU Monitor Mode
window.
Monitoring CUs
19