HP XP7 Storage - Manual (Page 67)

Creating a PFC group
Prerequisites
•
Required role: Storage Administrator (System Resource Management)
•
You must enable the Remote Web Console secondary window. For details, see the HP XP7
Remote Web Console User Guide.
A host adapter can belong to only one PFC group. To create a PFC group and add host adapters
to the group:
1.
Display the Remote Web Console main window.
2. Click Reports > Performance Monitor > Performance Control to open the Performance Control
window.
3. Click to change to Modify mode.
4. In the Performance Control window, click Performance Control. The Performance Control main
window appears.
5. Select the WWN tab.
6. In the lower-left tree, select and right-click the Storage System folder.
7. From the pop-up menu, select Add New PFC Group.
8. In the Add New PFC Group window, enter the name of the PFC group and then select OK. A
PFC group is created and a PFC group icon ( ) is added to the lower-left tree.
9. Select an HBA from the upper-left tree and select a PFC group from the lower-left tree.
Next, click Add WWN.
Repeat this operation until all desired HBAs are added to the PFC group.
NOTE:
•
Select a host adapter from below Monitor. You cannot add HBAs from below Non-Monitor
to PFC groups.
•
When selecting a host adapter that is already contained in some PFC group from the
upper-left tree, the Add WWN button is not activated. Select a host adapter that is not
contained in any PFC groups.
10. Click Apply to apply the settings to the storage system.
Related topics
•
“WWN tab of the Performance Control main window” (page 211)
Deleting an HBA from a PFC group
Prerequisites
•
Required role: Storage Administrator (System Resource Management)
•
You must enable the Remote Web Console secondary window. For details, see the HP XP7
Remote Web Console User Guide.
1. Display the Remote Web Console main window.
Working with PFC groups 67