Clear paper jams, See clear paper jams – HP OFFICEJET 4500 User Manual
Page 130
•
Make sure that the device is clean. For more information, see Maintain the device.
•
Make sure that the trays are loaded correctly and are not too full. For more
information, see Load media.
This section contains the following topics:
•
•
Clear paper jams
If the paper was loaded in the main tray, you might need to clear the paper jam from the
rear door.
Paper can also jam in the automatic document feeder (ADF). If the product has an
automatic document feeder (ADF), several common actions can cause paper to jam the
ADF:
•
Placing too much paper in the ADF tray. For information on the maximum number of
sheets allowed in the ADF, see Load an original on the scanner glass.
•
Using paper that is too thick or too thin for the device.
•
Trying to add paper to the ADF tray while the device is feeding pages.
To clear a paper jam from the rear door
1. Press in the tab on the left side of the rear door to release the door. Remove the door
by pulling it away from the device.
CAUTION: Trying to clear a paper jam from the front of the device can damage
the print mechanism. Always access and clear paper jams through the rear door.
2. Gently pull the paper out of the rollers.
CAUTION: If the paper tears when you are removing it from the rollers, check
the rollers and wheels for torn pieces of paper that might be remaining inside the
device. If you do not remove all the pieces of paper from the device, more paper
jams are likely to occur.
3. Replace the rear door. Gently push the door forward until it snaps into place.
4. Press OK to continue the current job.
Chapter 7
126
Solve a problem