HP Virtual Connect 4Gb Fibre Channel Module for c-Class BladeSystem - Manual (Page 8)

Introduction 8
Command Changes Virtual Connect 3.70 Virtual Connect 4.01
add enet-connection
set enet-connection
Modified this command
to include the
McastFilter and
McastFilterSet
properties.
>add
enet-connection
<ProfileName>
[Network=
<NetworkName>]
>add
enet-connection
<ProfileName>
[Network=
<NetworkName>]
[McastFilter=
<McastFilterName>
|McastFilterSet=
<McastFilterSet
Name>]
add mcast-filter
remove mcast-filter
set mcast-filter
show mcast-filter
The new managed
element monitors and
manages multicast
group membership for
hosts subscribing to
IGMP multicast traffic.
Not supported All of these commands are
supported.
add mcast-filter-rule
remove
mcast-filter-rule
The new managed
element manages
Multicast Filter rules for
a Multicast Filter.
Not supported All of these commands are
supported.
add mcast-filter-set
remove
mcast-filter-set
set mcast-filter-set
show mcast-filter-set
The new managed
element manages
Mulitcast Filtersets.
Not supported All of these commands are
supported.
reset port-protect
set port-protect
show port-protect
The new managed
element monitors the
downlink switch ports
for network loop
condition, pause flood
condition, and takes
protection action by
disabling the port when
such a condition is
detected.
Not supported All of these commands are
supported.
reset loop-protect
set loop-protect
show loop-protect
The managed element is
deprecated in 4.01.
Use the port-protect
command.
All of these commands
are supported.
All of these commands are
supported. The
loop-protect managed
element will be removed in
future releases. HP
recommends using the
port-protect managed
element.
reset qos
set qos
show qos
The new managed
element manages the
quality of service
configurations.
Not supported All of these commands are
supported.
set qos-class
show qos-class
The new managed
element manages the
class of the active QoS
configuration.
Not supported All of these commands are
supported.
set qos-classifier
show qos-classifier
The new managed
element manages the
traffic classifier for the
active QoS
configuration.
Not supported All of these commands are
supported.