HP Virtual Connect 4Gb Fibre Channel Module for c-Class BladeSystem - Manual (Page 9)

Introduction 9
Command Changes Virtual Connect 3.70 Virtual Connect 4.01
set qos-map
show qos-map
The new managed
element manages the
traffic classification
maps of the active QoS
configuration.
Not supported All of these commands are
supported.
set session
show session
The new managed
element manages the
session timeout value.
Not supported All of these commands are
supported.
add fabric
set fabric
Modified these
commands to include
the preferred and
maximum speed
settings
add fabric<Name>
Bay=<BayNum>
Ports=<PortList>
[Speed=<Auto|2Gb|4
Gb|8Gb>]
[LinkDist=
<Auto|Manual>]
add fabric <Name>
Bay=<BayNum>
Ports=<PortList>
[Speed=<Auto|2Gb|4
Gb|8Gb>] [LinkDist=
<Auto|Manual>]
[PrefSpeedType=
<Auto|Custom>]
[PrefSpeed=
<100Mb-8Gb in 100Mb
steps>]
[MaxSpeedType=
<UnRestricted|
Custom>] [MaxSpeed=
<100Mb-8Gb in 100Mb
steps>]
add fcoe-connection
set fcoe-connection
Modified these
commands to include
the "Preferred" and
"Auto" speed types
add
fcoe-connection
<ProfileName>
[Fabric=
<FabricName>]
[SpeedType=
<1Gb|2Gb|4Gb|8Gb
|Custom|
Disabled>]
[CustomSpeed=
<100Mb-10Gb>]
[WWNAddressType=
<Factory-Default
|User-Defined>]
[PortWWN= <WWN
address>]
[NodeWWN= <WWN
address>]
[MACAddressType=
<Factory-Default
|User-Defined>]
[EthernetMac= <MAC
Address>]
add fcoe-connection
<ProfileName>
[Fabric=
<FabricName>]
[SpeedType=
<1Gb|2Gb|4Gb|8Gb|
Auto|Custom|
Preferred|
Disabled>]
[CustomSpeed=
<100Mb-10Gb>]
[WWNAddressType=
<Factory-Default|
User-Defined>]
[PortWWN= <WWN
address>] [NodeWWN=
<WWN address>]
[MACAddressType=
<Factory-Default|U
ser-Defined>]
[EthernetMac= <MAC
Address>]
set role
show role
Modified these
commands to include
the "Operations"
property
set role <RoleName>
Order=<order>
set role <RoleName>
Order=<order>
Operations=
<operations>