HP Virtual Connect 4Gb Fibre Channel Module for c-Class BladeSystem - Manual (Page 115)

Command line 115
Item Description
enc0
->show statistics-throughput enc0:1:d1:v1
Displays the subport throughput statistics for subport v1 of port d1 from the module in
bay1 of enclosure enc0
->show statistics-throughput config
Displays the current configuration of the throughput statistics
->show statistics-throughput LAGID=enc0:1:lag25
Displays the aggregated throughput statistics based on the LAGID 25 for the module in
bay1 of enclosure enc0
Item Description
set statistics-
throughput
Enable or disable the port throughput statistics and set the sample rate.
Syntax
set statistics-throughput <Enabled=[true|false]>
[SampleRate=<1m|2m|3m|4m|5m|1h>]>
Parameters
Enabled
(optional)
Enables or disables port throughput statistics. Valid values include "true" and "false".
SampleRate
(optional)
Configures the sample rate for statistics collection. Valid values include:
• Use SampleRate=1m for 1 minute samples, collecting up to 5 hours of samples.
• Use SampleRate=2m for 2 minute samples, collecting up to 10 hours of samples.
• Use SampleRate=3m for 3 minute samples, collecting up to 15 hours of samples.
• Use SampleRate=4m for 4 minute samples, collecting up to 20 hours of samples.
• Use SampleRate=5m for 5 minute samples, collecting up to 25 hours of samples.
• Use SampleRate=1h for 60 minute samples, collecting up to 12.5 days of
samples.
Port throughput statistics are accessible using the show statistics-throughput
command.
Examples
->set statistics-throughput Enabled=true SampleRate=2m
Enables the port throughput statistics with the sample rate set to 2 minutes
->set statistics-throughput Enabled=false
Disables the port throughput statistics
status
View overall domain status information.
Supported actions: help, show
Item Description
show status Display the status of the domain and all components in the domain.
Syntax
show status
Example
->show status
Displays domain status information