HP Virtual Connect 4Gb Fibre Channel Module for c-Class BladeSystem - Manual (Page 26)

Command line 26
Item Description
->show devicebay enc0:2
Displays detailed information for device bay 2 of the local enclosure
->show devicebay enc1:4
Displays detailed information for device bay 4 of a remote enclosure
->show devicebay enc0:5
Displays detailed information for a multi-blade server in device bays 5-8 of the
primary enclosure.
domain
Manage general Virtual Connect domain settings and information.
Supported actions: delete, help, set, show
Item Description
delete domain Delete the existing Virtual Connect domain configuration.
Deleting the domain removes the entire Virtual Connect domain configuration and
resets it to the original defaults. After the domain is deleted, you are logged out and
the Virtual Connect Manager resets.
Syntax
delete domain [-quiet]
Option
quiet Suppresses user confirmation prompts. This option is useful when scripting delete
domain operations.
Examples
->delete domain
Deletes the Virtual Connect domain configuration and prompts for user
confirmation
->delete domain -quiet
Deletes the Virtual Connect domain quietly without prompting for user confirmation
(primarily used in automated scripting scenarios)
Item Description
set domain Modify general Virtual Connect domain configuration properties, such as the
domain name, domain IP address, and MAC and WWN address pool settings.
Syntax
set domain [Name=<NewName>] [DomainIp=<Enabled|Disabled>]
[IpAddress=<IPAddress>] [SubnetMask=<mask>]
[Gateway=<Gateway>] [MacType=<VC-Defined|Factory-Default|
User-Defined>] [MacPool=<1-64>] [MacStart=<MAC address>]
[MacEnd=<MAC address>] [WwnType=<VC-Defined |
Factory-Default | User-Defined>] [WwnPool=<1-64>]
[WwnStart=<WWN Address>] [WwnEnd=<WWN Address>]
[SingleDense=true|false]
Properties
Name(optional) The new name of the domain. Valid characters include alphanumeric, "_", and ".".
The maximum length of the name is 31 characters.
DomainIP (optional) Enables or disables the Virtual Connect domain IP address. If enabled, a valid IP
address and subnet mask must be configured. If disabled, DHCP is used to obtain
a valid IP address.
Enabling domain IP address configuration or changing the domain IP address can
cause a temporary loss of connectivity to the Virtual Connect Manager. Use caution
when changing these settings. Valid values include "Enabled" and "Disabled".
IpAddress (Required A valid IP address to use for the domain IP address configuration. The IP address