HP Virtual Connect 4Gb Fibre Channel Module for c-Class BladeSystem - Manual (Page 34)

Command line 34
Item Description
server Ethernet connections, and VLAN ID mappings can be modified to ensure
uniqueness.
PrefSpeedType
(optional)
The default connection speed for any Ethernet connection using multiple
networks. Valid values are "Auto" and "Custom". "Custom" enables you to
configure the preferred speed. The default value is "Auto".
PrefSpeed (required if
PrefSpeedType is
Custom)
The default connection speed for any Ethernet connection using multiple
networks. Valid values range from 100Mb to 10Gb in 100Mb increments.
MaxSpeedType
(optional)
The maximum connection speed for any Ethernet connection using multiple
networks. Valid values are "Unrestricted" and "Custom". "Custom" enables you
to configure the preferred speed. The default value is "Unrestricted".
MaxSpeed (required if
MaxSpeedType is
Custom)
The maximum connection speed for any Ethernet connection using multiple
networks. Valid values range from 100Mb to 10Gb in 100Mb increments.
VlanCapacity
(optional)
The VLAN capacity mode. Valid values are "Legacy" and "Expanded". The
default value is "Legacy".
"Legacy" mode allows up to 320 VLANs per module and 28 VLANs per server
connection.
"Expanded" mode allows up to 1000 VLANs per domain and 162 VLANs per
physical server port.
Examples
->set enet-vlan SharedServerVLanId=true
Enables SharedServerVLanId
->set enet-vlan PrefSpeedType=Custom PrefSpeed=500
MaxSpeedType=Custom MaxSpeed=2500
Sets the preferred connection speed for all connections using multiple networks to
500Mb, and the maximum connection speed to 2.5Gb
->set enet-vlan VlanCapacity=Expanded
Sets the VLAN capacity mode to Expanded to allow for larger network
configurations
Item Description
show enet-vlan Display general Ethernet VLAN configuration settings.
Syntax
show enet-vlan
Example
->show enet-vlan
Displays Ethernet VLAN configuration settings
external-manager
Manage external manager settings and information.
Supported actions: help, remove, set, show
Item Description
remove
external-manager
Remove an existing external manager (VCEM) and regain local management
profile control of the domain.
When releasing the profile control, you must specify values for each MacType,
WwnType, and ServerIdType.
IMPORTANT: You must set the external manager enabled to "false" using the set
external-manager command before using the remove external-manager