HP Virtual Connect 4Gb Fibre Channel Module for c-Class BladeSystem - Manual (Page 42)

Command line 42
Item Description
->set fc-connection BlueProfile 1 Fabric=SAN_7
Changes the FC SAN fabric of an FC SAN connection
->set fc-connection BlueProfile 1 Speed=4Gb
Changes the port speed of an FC SAN connection
->set fc-connection BlueProfile 1 BootPriority=Primary
BootPort=50:06:0B:00:00:C2:62:00 BootLun=5
Changes the SAN boot priority and sets additional boot parameters
Item Description
show fc-connection Display the FC SAN connections associated with the server profiles.
Syntax
show fc-connection [<ConnectionID>]
Parameter
ConnectionID
(optional)
The ID of an existing FC SAN connection. The ID format is <ProfileName:Port>.
Use <ProfileName:*> to display all FC SAN connections of a profile. Use "*" to
display all FC SAN connections in the domain.
Examples
->show fc-connection
Displays all FC SAN connections in the domain
->show fc-connection Profile1:*
Displays all FC SAN connections of a profile named Profile1
->show fc-connection Profile1:1
Displays a specific FC SAN connection of a profile named Profile1
fcoe-connection
Manage FCoE connections.
Supported actions: add, help, remove, set, show
Item Description
add fcoe-connection Add a new FCoE connection to an existing server profile. For more information,
see "General requirements for adding FC or FCoE connections (on page 174 )."
If the QoS type for the domain is set to "CustomNoFcoe", a "cannot add fabric
when QoS configuration type is CustomNoFCoE" error message appears. For
more information about setting the QoS type, see "qos (on page 86 )."
Syntax
add fcoe-connection <ProfileName>
[Fabric=<FabricName>|FcoeNetwork=<FcoeNetName>]
[SpeedType=<1Gb|2Gb|4Gb|8Gb|Auto|Custom|Preferred|Disabl
ed>] [CustomSpeed=<100Mb-10Gb>]
[WWNAddressType=<Factory-Default|User-Defined>]
[PortWWN=<WWN address>] [NodeWWN=<WWN address>]
[MACAddressType=<Factory-Default|User-Defined>]
[EthernetMac=<MAC Address>]
Parameter
ProfileName (required) The name of an existing profile to which the new connection is added
Properties
Fabric (optional) The name of an existing fabric created on an FCoE module to associate with the
connection. If the fabric name is not specified, the connection is marked as