HP Virtual Connect 4Gb Fibre Channel Module for c-Class BladeSystem - Manual (Page 48)

Command line 48
Item Description
show interconnect Display all interconnect modules in the domain.
Syntax
show interconnect [<ModuleID>|*]
Parameter
ModuleID (optional) The ID of the interconnect module. Use “*” to display a detailed view of all
modules in the VC domain. If not specified, a summary output of all modules
appears.
Examples
->show interconnect
Displays a summary of all interconnect modules
->show interconnect *
Displays detailed information for all interconnect modules
->show interconnect *:5
Displays detailed information for all enclosures with interconnect modules in
interconnect bay number 5
->show interconnect enc0:*
Displays interconnect modules in all bays of a specific enclosure
->show interconnect enc0:3
Displays detailed information on a specific interconnect module in interconnect
bay 3 of the primary enclosure
interconnect-mac-table
Display interconnect module MAC table information.
Supported actions: help, show
Item Description
show interconnect-
mac-table
Display interconnect module MAC table information for the specified module.
Syntax
show interconnect-mac-table <ModuleID> [FilterBy]
Parameter
ModuleID (required) The ID of the module for which to display the MAC table. The ID is in the format
of <EnclosureID>:<BayNumber>.
Option
FilterBy (optional) The MAC table output can be filtered by property. The output filter syntax used is
Property=Value.
Examples
->show interconnect-mac-table enc0:1
Displays the module MAC table for the module in bay 1 of enclosure enc0
->show interconnect-mac-table enc0:1 Port=d6
Displays the module MAC table for the module in bay 1 of enclosure enc0 filtered
to show only addresses on port d6
->show interconnect-mac-table enc0:1 "MAC
Address"=00:26:55:58:89:9d
Displays the module MAC table for the module in bay 1 of enclosure enc0 filtered
on a single MAC address