HP Virtual Connect 4Gb Fibre Channel Module for c-Class BladeSystem - Manual (Page 76)

Command line 76
Item Description
Parameter
Name (required) The name of an existing network access group in the domain. Use "*" to remove all
removable network access groups.
Examples
->remove network-access-group DatabaseNetGroup
Removes a specified network access group
->remove network-access-group *
Removes all removable network access groups
Item Description
set network-
access-group
Modify an existing network access group.
Syntax
set network-access-group <Name> Name=<NewName>
Parameter
Name (required) The name of an existing network access group to modify
Property
Name (required) The new name of the network access group
Example
->set network-access-group NetGroup1 Name=NetGroup2
Changes the name of an existing network access group from NetGroup1 to
NetGroup2
Item Description
show network-
access-group
Display all network access groups in the domain.
Syntax
show network-access-group [<Name>|*]
Parameter
Name (optional) The name of an existing network access group in the VC domain. Use "*" to display a
detailed view of all the network access groups. If not specified, a summary view of all
network access groups appears.
Examples
->show network-access-group
Displays a summary of all network access groups
->show network-access-group *
Displays detailed information for all network access groups
->show network-access-group DatabaseNetGroup
Displays detailed information for a specific network access group
network-range
Manage multiple networks in a shared uplink set.
Supported actions: add, help, remove, set
Item Description
add network-range Create multiple networks in a shared uplink set.
Syntax
add network-range [-quiet] UplinkSet=<UplinkSetName>
[NamePrefix=<prefix>] [NameSuffix=<suffix>]
VLANIds=<VLAN range list> [State=<enabled|disabled>]
[PrefSpeedType=<auto|custom>] [PrefSpeed=<100Mb-10Gb