HP Virtual Connect 4Gb Fibre Channel Module for c-Class BladeSystem - Manual (Page 89)

Command line 89
Item Description
enabled classes, excluding the FCoE_Lossless class, is 100. When the share of an
enabled class is modified, the share of the Best_Effort class is adjusted to maintain
100% among all enabled classes. An error is returned if the share modification
causes the Best_Effort class to have no share. The Share and MaxShare
properties of the real time class are set to the same value. When the Share value
is modified, the MaxShare is updated automatically, and vice versa. The maximum
Share and MaxShare value for a real time class is 50.
MaxShare (optional) The maximum share the traffic class can use when other traffic classes are not using
their shares. The valid values are 1-100. This value cannot be modified for a system
class, except for the Best_Effort class. The MaxShare value should be greater than
or equal to the Share value.
EgressDOT1P
(optional)
Traffic classified in a particular class egresses with the specified DOT1P priority
marking on the VLAN tag. Valid values are 1-7. The EgressDOT1P value must be
unique among the enabled classes. System classes have predefined egress DOT1P
priority values: 3 for the FCoE_Lossless class and 0 for the Best_Effort class. This
value cannot be modified for system classes.
Examples
->set qos-class Blue Name=Green
Renames a class
->set qos-class Green Enabled=false
Disables a class
->set qos-class Green Enabled=true Share=5 MaxShare=5
RealTime=true
Modifies a class to be a real time class
Item Description
show qos-class Display the QoS traffic classes of the active QoS configuration
Syntax
show qos-class [<Name> | *] [FilterBy]
Parameters
Name (optional) The existing QoS class name. Detailed information of the specified traffic class is
displayed. If "*" is specified, then detailed information of all QoS classes is
displayed. If the name is not specified, a summary of all classes is displayed.
FilterBy (optional) Filters the output of the show command by the specified attribute in the format
<columnID>=<value>.
Examples
->show qos-class RealTimeClass
Displays a specific QoS class
->show qos-class
Displays a summary of all QoS classes
->show qos-class *
Displays detailed information for all QoS classes
->show qos-class "Real Time"=True
Displays all Real Time classes using the FilterBy parameter
qos-classifier
Manage the traffic classifier for the active QoS configuration.
Supported actions: help, set, show