HP 3PAR Application Software Suite for VMware - Manual (Page 35)

4. Select the Recovery Set to mount from the list of the Recovery Sets, and click Mount/Unmount.
5. The Mount Virtual Copy screen appears with the following options:
•
Mount on ESX host as datastore—Select from a list of ESX/ESXi hosts managed by the
vCenter Server that share access to the HP 3PAR StoreServ Storage System.
•
Mount on Proxy Host—Select from a list of hosts not managed by the vCenter Server, but
which have access to the HP 3PAR StoreServ Storage System.
6. Click Mount.
The Mount Local Recovery Set — Confirm dialog box appears.
7. Click Yes, to mount the Recovery Set.
After the Recovery Set is successfully mounted, the status of the Recovery Set is displayed as
Mounted. System also displays appropriate values in the following columns:
•
Exported Host
•
LUN ID
•
ESX Host
•
Virtual Copy datastore
NOTE: You need to perform a similar procedure to mount Recovery Sets on a datastore.
Unmounting Recovery Sets
CAUTION: Recovery Manager for VMware vSphere does not verify if the volume that is unmounted
is in use. So you must ensure that the volume is inactive before you unmount it.
To unmount a previously mounted Recovery Set:
1.
Navigate to the vSphere Web Client home page.
2. Click VMs and Templates.
3. Click a VM, and then click Recovery Sets on the left navigation pane. System displays all the
available Recovery Sets in the Recovery Sets tab under Related Objects tab.
Unmounting Recovery Sets 35