HP 3PAR Application Software Suite for VMware - Manual (Page 8)

•
-setname <VirtualCopySetName>
(Optional) Specifies that in addition to the Recovery Set time stamp, the Recovery Set name
can be used to personalize the identity of the Recovery Set. By default, the name is set to
reflect the current time.
•
-vcserver <vCenterServerName>
The VMware vCenter Server name or IP address. This option is required.
•
-vcuid <vCenterServerUserID>
The VMware vCenter server login user name. This option is required.
•
-vcpwd <vCenterServerPassword>
The VMware vCenter Server login password. This option is required unless -vcfile is used
to specify the credential store file.
•
-vcfile <VMwareCredentialStoreFileLocation>
The VMware credential stores file location. The –vcfile option is optional when –vcpwd is
specified. For example, C:\Users\[User Name]\AppData\Roaming\VMware\
credstore\vicredentials.xml
.
NOTE: For VMware credential store file creation, refer to the vCenterRegister option.
NOTE: To run the RMVMware CLI command with the vCenter Credential Store File, you
must be added as a user to have permission to access the credential file.
•
-inserv <InServName>
The name or IP address of the HP 3PAR storage system on which the VM or Datastore resides.
This option is required.
•
-inservuid <InServUserID>
The HP 3PAR StoreServ Storage system user login name.
•
-inservpwd <InServPassword>
The HP 3PAR StoreServ Storage system login password. This option is not required if the
Storage System name, user ID, and password have been registered.
NOTE: This option will not be supported in a future release.
•
-vmlist
Optional to provide Virtual Machine names for application consistency snapshot. If not set,
all Virtual Machines under the Datastore is applied. This option can only be applied if
-consistency yes
is specified.
•
-expiry <VirtualCopyExpiryInHour>
(Optional) Sets the amount of time (in hours) before a Recovery Set is deleted from the system
regardless of the maximum count. If an expiration time period is not specified with this option,
the Recovery Set is deleted after it reaches the oldest position in the queue beyond the maximum
count specified through the policy settings. If this option is not set, the default policy is applied.
•
-retention <VirtualCopyRetentionInHour>
(Optional) Sets the amount of time (in hours) that Recovery Sets are retained, during which
period the Recovery Set cannot be altered. The Recovery Set is not deleted after the retention
period but is then available for modification and deletion. If this option is not set, the default
policy is applied.
Examples:
8 Overview