HP LaserJet M9040M9050 Multifunction Printer series - Manual (Page 94)

Depending on your HP Jetdirect print server model and operating version, the following are some tasks
that you can perform from the Networking screens:
● Change network configuration settings for various types of network connections.
● Turn on or turn off management protocols.
● Set up a support contact and support URLs.
● Set a password to control access to the product and network configuration settings. This password
is synchronized with the password that you set on the Security screen under the Settings tab, so
you may set or reset it from either screen.
● Configure the security of your product through the use of passwords, access lists, and management
protocols.
● View general network status information, including network statistics that are stored on the print
server, for network troubleshooting or optimization.
● View protocol information for all supported network connections.
● Open the HP Jetdirect Configuration page. See HP Jetdirect Security Configuration Wizard
on page 83 .
● Set the frequency at which the HP EWS checks the network status.
For more information about the Networking screens, see the following sources:
● Help. On each Networking screen, a Support and ? link provide descriptions of the networking
features. Also, from the Support screen you can gain access to additional help from the HP Web
site.
82 Chapter 5 Managing network operation from the Networking screens ENWW