HP XP Command View Advanced Edition Software - Manual (Page 150)

• In a configuration where multiple file servers or database servers are sharing one backup server,
manage all the secondary volumes in a single RAID Manager instance on the backup server.
Creating a cascade configuration definition file for Exchange
database backup
To back up an Exchange database in a cascade configuration, you must edit the definition file for
the cascade configuration on the database server.
• A sample definition file for the cascade configuration is at the following location:
Application-Agent-installation-folder
\DRM\conf\cascade\VHOST.dat.model
• After you have edited the definition file for the cascade configuration, register it with the following
name:
Application-Agent-installation-folder
\DRM\conf\cascade\ Exchange-virtual-server-name .dat
The following table lists the parameters defined in the definition file for the cascade configuration.
Table 47 Parameters defined in the definition file for the cascade configuration
Omission
Maximum
character
length
Description
#2
Parameter
#1
N
66
(including
[
and ] )
Indicates the site name and the
beginning of a section.
Everything from
[ site-name ] to the end
of the file, or to the line immediately
above the next
[ site-name ] is treated
as one section.
site-name can consist of up to 64
alphanumeric characters, although the
first character must be an alphabetic
character.
#3
[ site-name ]
N 255
Specify the database server name
specified in the
-cascade option of the
backup command in the form of a host
name or IP address.
When specifying a host name for this
parameter, use a physical host name.
DB_SERVER
N 255
Specify the backup server name spe-
cified in the
-cascade option of the
backup command in the form of a host
name or IP address.
BK_SERVER
Preparation for using Application Agent 150