Backing up storage groups to a remote site, Operations at the local site – HP XP Command View Advanced Edition Software User Manual

Page 426

Advertising

•

A storage group

STR1

exists on the database server (

DBServer

) in the local site, and services

are running.

•

The volume (usual operation is in the pair status)

TC01,EXG11

for Continuous Access Software

or Continuous Access Journal contains the data files for the storage group

STR1

•

The volume (usual operation is in the pair status)

TC02,EXG12

for Continuous Access Software

or Continuous Access Journal contains the transaction log files and checkpoint files for the storage
group

STR1

•

Business Copy volume is configured as a pair with the copy group name

SI01,EXG01

and

SI02,EXG02

•

The system is set up so that the generation identifier for the backup destination in the remote site
is

remote_0

•

The volume in the remote site is not normally mounted. If required, it will be mounted to the

drive and the

drive of the backup server.

•

Use

Operation_A

as the operation ID.

Backing up storage groups to a remote site

This section explains how to back up storage groups to a remote site. The procedure for restoring the
data to a local site and the procedure for restoring the data to a remote site is explained separately.

Operations at the local site

Check the volume on which the database will be backed up and the generation identifier.

Execute the

drmexgdisplay

command on the database server.

DBServer > drmexgdisplay -cf

STORAGEGROUP: STR1

T OBJECT INFORMATIONSTORE FILE FS DG DEVICE

COPY-GROUP COPY-FUNC GEN-NAME

M MAILBOXSTORE MAILBOX1(STR1) D:\STR1\priv1.edb D: - Harddisk1

SI01,EXG01 Business Copy local_0

- - - - - - -

SI01,EXG01 Business Copy local_0

M MAILBOXSTORE MAILBOX1(STR1) D:\STR1\priv1.edb D: - Harddisk1

TC01,EXG11 Continuous Access Software remote_0

- - - - - - -

TC01,EXG11 Continuous Access Software remote_0

T TRANSACT - E:\STR1\E00*.log E: - Harddisk2