HP XP Command View Advanced Edition Software - Manual (Page 424)

To perform restoration of data from a VSS backup, the Protection Manager service must be running
on the backup server.
To roll forward transaction logs at the time of restoration:
1. Check the backup ID and Information Store name of the backup data.
To check the backup ID and Information Store name, execute the drmexgcat command. The
backup ID is displayed in BACKUP-ID and the Information Store name is displayed in
INFORMATIONSTORE . Since this example restores the mailbox store, check the Information Store
name of the item for which OBJECT is MAILBOXSTORE .
DBServer > drmexgcat -target SG1
STORAGEGROUP: SG1
BACKUP-ID:0000000001 BACKUP-MODE: VSS STORAGEGROUP: ST1 ORIGINAL-ID:0000000001
START-TIME:2007/06/01 10:30:00 END-TIME: 2007/06/01 10:31:00 HOSTNAME:DBServer
T OBJECT INFORMATIONSTORE FILE FS DG DEVICE
COPY-GROUP
M MAILBOXSTORE IS12(SG1) E:\SG1\IS12.edb G: - Harddisk1
VG01,vol03
- - - - - - -
VG01,vol03
P PUBLICSTORE IS11(SG1) E:\SG1\IS11.edb F: - Harddisk1
VG01,vol02
- - - - - - -
VG01,vol02
T TRANSACT - E:\SG1\E00*.log E: - Harddisk1
VG01,vol01
- - - - - - -
VG01,vol01
C CHECKPOINT - E:\SG1\E00.chk E: - Harddisk1
VG01,vol01
- - - - - - -
VG01,vol01
2. Create a backup ID record file.
Execute EX_DRM_BACKUPID_SET with the backup ID specified to create a backup ID record
file. Here, use operation ID Operation_A .
DBServer > EX_DRM_BACKUPID_SET Operation_A -backup_id 0000000001
3. Specify the Information Store name to restore the Information Store from the secondary volume
to the primary volume and roll forward the transaction logs.
Restore the data from the secondary volume to the primary volume. To restore the data, execute
EX_DRM_EXG_RESTORE on the database server.
To execute roll-forward, specify the -recovery option. To specify the Information Store name,
specify the -target option.
DBServer > EX_DRM_EXG_RESTORE Operation_A -resync -recovery -target
SG1\IS12
Backing up and restoring between local sites and remote sites
This section provides an example of backing up storage groups on Exchange Server from a primary
volume in the local site to a secondary volume in the remote site, and an example of restoring storage
groups from a secondary volume in the remote site to a primary volume in the local site, using the
volume replication functionality such as Continuous Access Software or Continuous Access Journal,
which allows you to copy data between storage systems. The explanations in this section use operation
examples for Exchange Server 2007.
Operation for Exchange databases 424