Closing software programs, Setting your printer as the default, Communications test and two-way communications – HP Deskjet 710c Printer User Manual

Page 14

Advertising
background image

14

Additional information about installing your
printer software

Closing software programs

In Windows 3.1x:

1

While holding down ALT, press TAB to locate an open software
program.

2

When you locate an open software program, release both keys.

3

Click File, and then click Exit.

4

Repeat steps 1 through 3 for each open software program.

In Windows 95, Windows 98, and Windows NT 4.0:

1

Right-click the software program on the taskbar and click Close.

2

Repeat step 1 for each open software program.

Setting your printer as the default

To set your printer as the default in Windows NT 4.0:

1

Click Start on the taskbar, click Settings, and then click Printers.

2

Right-click the HP DeskJet 710C Series Printer icon and choose
Set As Default
.

Communications test and two-way communications

The printer software tests the communication between your computer and
your printer and tells you if you have two-way communication. Two-way
communication allows your printer and computer to communicate and gives you
access to all the features of your HP DeskJet printer. The cable between your
printer and computer must be bidirectional to allow two-way communication–
the HP IEEE-1284-compliant Parallel Interface Cable (C2950A) is best. If you do
not have two-way communication, your printer cannot send messages to the
computer. However, you can still print.

If you are installing

printer software,

close all software

programs except the

HP DeskJet installer.

When all software

programs are

closed, only Program

Manager appears.

Advertising