HP Deskjet 710c Printer - Manual (Page 48)

27
What If
T HE PRINTER WON ’ T PICK
UP THE ENVELOPE
If you’re printing a
single envelope using
the single-envelope slot,
you might not have
pushed the envelope far
enough into the printer.
If you’re printing a stack
of envelopes, you might
have included too many
in the stack. Reduce the
number and try again.
Y OUR ENVELOPES PRINT
LIKE THIS
You might have put the
envelope in incorrectly.
Or you might not have
selected an envelope
in the Setup tab of the
HP print settings box.
Or you might not
have made a special
adjustment required by
your word processor.
(See the word processor
user’s guide for
instructions.)
How to Print a Stack of Envelopes
Ẅ
In the HP print settings box, click the Setup tab, then select an envelope size in
the Paper Size box. (See page 9 for how to get to the HP print settings box.)
ẅ
Slide both of the paper adjusters out.
Make sure the IN drawer is empty.
Ẇ
Put a stack of up to 15 envelopes in the printer, as shown below. (If you’re using
thick envelopes, you might need to reduce the number.)
Select an envelope.
Flap side up and the
flap to the left