HP Deskjet 710c Printer - Manual (Page 53)

32
ẅ
Put the transparencies in your printer with the rough side down and the adhesive
strip forward. (You can peel off the adhesive strip after printing.)
Ẇ
Slide in the paper adjusters, just as you would for plain paper. Push the IN drawer
back in and flip the OUT tray down.
ẇ
Print the transparency.
Ẉ
Be patient.
Because the printer uses more ink, lays the colors down more slowly, and allows
for a longer drying time between sheets, transparencies take a while to print.
■ Change the paper type in the HP print settings box back to Plain Paper or to
whatever is appropriate for what you’ll be printing next.
■ Remove any remaining transparencies from the IN drawer and replace them with
plain paper or whatever you’ll be using next.
Adhesive strip forward, tape
side up
Rough side down
A F T E R P R I N T I N G
What If
T HE INK NEVER DRIES OR
THERE ARE CRACKS IN
THE SOLID BLOCKS
OF COLOR
❚ You might have printed
on the wrong side of the
transparency. Make sure
to put it into the printer
rough side down.
❚ You might be trying to
print on a transparency
that wasn’t meant for an
inkjet printer.
T HE QUALITY ISN ’ T WHAT
YOU WERE EXPECTING
You might not have
chosen the right paper
type and print quality.
Follow the steps in the
procedure above, and try
printing again.
Handy Hints
P ROTECT YOUR
TRANSPARENCIES
If you want to make notes
on your transparency
as you talk, print the
transparency as a
flipped document
(described on page 18).