HP LaserJet 5000 Printer series - Manual (Page 160)

B-14 Control Panel Menus
EN
JAM RECOVERY=
AUTO
AUTO
ON
OFF
Determine how the printer behaves when a
paper jam occurs.
AUTO
: The printer automatically selects the
best mode for printer jam recovery (usually
ON
).
This is the default setting.
ON
: The printer automatically reprints pages
after a paper jam is cleared.
OFF
: The printer does not reprint pages
following a paper jam. Printing performance
might be increased with this setting.
PAPER REFORMING=
OFF
OFF
ON
Paper reforming has two main purposes:
1. To reduce jams, wrinkles, and bent corners
when printing on both sides of a sheet of
paper (duplexing).
2. To reduce bent corners and wrinkles when
printing on one side of a sheet of narrow
media (such as legal, rotated letter, or
rotated A4).
Print speed will be slower when
PAPER
REFORMING=ON
.
MAINTENANCE
MESSAGE=OFF
OFF
This item appears only after the
PERFORM
PRINTER MAINTENANCE
message displays.
OFF
: The
PERFORM PRINTER MAINTENANCE
message will be cleared and will not be
displayed again until the next maintenance is
due.
The message should not be turned off unless
the printer maintenance has been performed.
If the required maintenance is not performed,
the printer’s performance will degrade.
SMALL PAPER
SPEED=NORMAL
NORMAL
SLOW
Select
SLOW
when alternately printing
envelopes or small paper and standard paper
sizes.
Be sure to return the speed to
NORMAL
when
finished.
Configuration Menu (Continued)
Item Values Explanation