HP LaserJet 5000 Printer series - Manual (Page 80)

68 Chapter 3: Printer Maintenance
EN
Cleaning the Printer
Before beginning these steps, turn the
printer off and unplug the power cord.
1 Open the top cover and remove the
toner cartridge.
WARNING!
Avoid reaching too far into the printer.
The adjacent fusing area might be hot!
Caution
To prevent damage to the toner
cartridge, do not expose it to light for
more than a few minutes.
2 Wipe any dust or dirt off the paper
feed guides (shaded areas) with a
dry, lint-free cloth.
Note
If toner gets on your clothing, wipe it off
with a dry cloth and wash clothing in
cold water. (Hot water sets toner into
fabric.)
3 Using the green handles, lift the
paper access plates and wipe off
any residue with a dry, lint-free cloth.
4 Close the paper access plates,
replace the toner cartridge, close
the top cover, plug in the power cord,
and turn the printer on.