HP LaserJet 1022nw Printer - Manual (Page 14)

Chapter overview
This chapter contains information that will be useful if you are installing the printer to a
wireless network, or if you are changing printer or network settings after you have installed
the printer. Specifically, this chapter contains a description of the printer Wireless light and
the configuration page, and an overview of the embedded Web server (EWS). In addition,
this chapter contains procedures for resetting the printer network setting and for switching
between wireless and wired communications.
The procedure you follow for installing the printer to a wireless network depends on whether
the network communicates through an infrastructure mode or through an ad-hoc mode. You
can find procedures for installing the printer to a wireless network in the HP LaserJet
1022nw printer Wireless Getting Started Guide that was packaged with the printer. For more
information about infrastructure and ad-hoc networks, see
Wireless networking basics .
NOTE For maximum efficiency, HP recommends the printer be connected to a network that uses
the infrastructure communication mode.
NOTE The printer cannot be connected to a wired and wireless network at the same time.
8 Chapter 2 Support information for installing to a wireless network ENWW