HP LaserJet 1022nw Printer - Manual (Page 22)

Resetting the printer to the factory default settings
Once the printer is configured for a network, its configuration settings are saved in its
memory. Resetting the printer to its factory default settings will clear all the settings from the
printer's memory for your network. This should only be done as a last resort when
troubleshooting the printer.
Resetting the printer to its factory default settings may require you to reinstall the printer
software. Additionally, you will also have to reconfigure the printer's security settings.
The printer's default settings are:
Option Default settings
Communication
mode ad-hoc
Network Name
(SSID) hpsetup
Encryption None
Wireless Radio On, if no LAN cable is attached
Resetting the factory defaults
When the printer is turned off, press and hold the G
O
and C
ANCEL
buttons. Turn on the
printer, and continue to hold the G
O
and C
ANCEL
buttons until all lights are blinking in unison.
16 Chapter 2 Support information for installing to a wireless network ENWW